How to Fix Huawei Oppo Clone A11 LCD Dead Recovery Firmware with MT6580 Flash File
How to Fix Huawei Oppo Clone A11 LCD Dead Recovery Firmware with MT6580 Flash File
If you have a Huawei Oppo Clone A11 smartphone that is stuck on the boot logo or has a dead LCD screen, you may need to flash it with a new firmware. A firmware is a software that controls the hardware and functions of your device. A flash file is a file that contains the firmware and can be used to update or restore your device.
In this article, we will show you how to download and install the Huawei Oppo Clone A11 flash file MT6580 LCD dead recovery firmware. This flash file is compatible with the MediaTek MT6580 chipset, which is a quad-core processor that powers many low-end Android devices. By flashing this file, you can fix various issues such as bootloop, hang on logo, LCD dead, virus infection, software error, and more.
Huawei Oppo Clone A11 Flash File MT6580 Lcd Dead Recovery Firmware
Requirements
Before you proceed with the flashing process, you will need the following:
A Huawei Oppo Clone A11 smartphone with a battery charge of at least 50%.
A USB cable to connect your device to your computer.
A computer with Windows OS and an internet connection.
The Huawei Oppo Clone A11 flash file MT6580 LCD dead recovery firmware. You can download it from here.
The SP Flash Tool software. You can download it from here.
The MediaTek USB VCOM drivers. You can download them from here.
Steps
Once you have all the requirements ready, follow these steps to flash your device:
Extract the Huawei Oppo Clone A11 flash file MT6580 LCD dead recovery firmware zip file on your computer. You will get a folder with several files inside.
Extract the SP Flash Tool zip file on your computer. You will get a folder with the SP Flash Tool.exe file and other files.
Install the MediaTek USB VCOM drivers on your computer. You may need to disable driver signature verification on Windows 10 to do this.
Run the SP Flash Tool.exe file as administrator. You will see a window like this:
Click on the Choose button next to the Scatter-loading File option. Navigate to the folder where you extracted the Huawei Oppo Clone A11 flash file MT6580 LCD dead recovery firmware and select the MT6580_Android_scatter.txt file.
The SP Flash Tool will load all the partitions of the firmware. Make sure all of them are checked.
Click on the Download button at the top of the SP Flash Tool window.
Turn off your Huawei Oppo Clone A11 smartphone and remove the battery if possible.
Connect your device to your computer via USB cable while holding the Volume Down or Volume Up button. This will put your device in download mode.
The SP Flash Tool will detect your device and start flashing it. You will see a progress bar at the bottom of the window.
Wait for the flashing process to complete. It may take several minutes depending on your device and firmware size.
When the flashing is done, you will see a green tick mark and a Download OK message on the SP Flash Tool window.
Disconnect your device from your computer and reinsert the battery if you removed it.
Turn on your device and wait for it to boot up. It may take longer than usual for the first time.
Congratulations! You have successfully flashed your Huawei Oppo Clone A11 smartphone with MT6580 LCD dead recovery firmware. You can now enjoy using your device without any issues 0efd9a6b88
https://www.bout2pullup.com/group/light-switch/discussion/18c7412c-e1f1-4faa-bb69-d2e73509ef71
https://www.adfgroup.org/group/mysite-200-group/discussion/6a53e64e-843b-42bc-a1ed-8b64ea99827e